Pipeline antifreeze protection and heating cable GS and Ce certificate

   pipe anti-freeze protect heating cable GS and CE certificateSenphus Pipe anti-freeze protect heating cable is from 1m to 49m usually, and we have exported them to Europe and North America for many years.The 6 to 13 degree thermostats can control the temperature of the heating cable and will save more power. &nb

Featured Products

   pipe anti-freeze protect heating cable GS and CE certificate

Senphus Pipe anti-freeze protect heating cable is from 1m to 49m usually, and we have exported them to Europe and North America for many years.The 6 to 13 degree thermostats can control the temperature of the heating cable and will save more power.

Pipe Anti-Freeze Protect Heating Cable GS and Ce Certificate
  


Pipe Anti-Freeze Protect Heating Cable GS and Ce Certificate

Pipe Anti-Freeze Protect Heating Cable GS and Ce Certificate
 

No.Model 
(Article)
Length(M)
11M-17W1m 
22M- 32W2m
34M-64W4m
48M-128W8m
512M-192W12m
614M-224W14m
718M-288W18m
824M-384W24m
936M-576W36m
1037M-629W37m
1149M-784W49m

 

 

 



calibre

15mm

22mm

28mm

35mm

42mm

48mm

60mm

76mm

Without pipe insulation

-20°C.

-13°C.

-10°C.

-7°C.

-5°C.

-4°C.

-3°C.

-2°C.

With 13mm pipe insulation

-45°C.

-45°C.

-40°C.

-40°C.

-35°C.

-30°C.

-25°C.

-20°C.
 

Installation: 

  1. first unwind the heating cable. The cable must never be connected to the power line when it is wound up.
  2. if the cable is too inflexible because of low temperatures, unwind it and put it for some minutes into the plug.
  3. afterwards you can pass the cable.
  4. the area around the pipe where you want to connect it with the cable must be accessibly and non-attached.
  5. the heating cable can not be passed behind walls
  6. put the thermostat with the round black contact area tightly on the coolest point of the pipe and fix it with insulating tape.
  7. finally put the whole cable on the pipe and fasten it every 30~60cm with insulating tape.
  8. attention: the cable must be fastening straight on the pipe
  9. now you can check if your cable works.
  10. afterwards insulate the water pipe and the heating cable with mineral rock wool or foam. Attention: never use more than 13mm of this material to insulate.
  11. in general the heating cable must be protected against mechanical damage or biting.
  12. the heating cable can not be put into liquids.
  13. finally plug the cable into a 230V main plug.

Pipe Anti-Freeze Protect Heating Cable GS and Ce Certificate
 

 

 

 

 

 

 

  

 

 

 

 

 

 

 

 

 


 

 

 

 

 

 

 

 

 

 

 

 



 
  

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours